Movement Joints and Cove-shaped Profiles

Mortar Bed Joint Profiles

Schluter^®-DILEX-MOP

Schluter-DILEX-MOP is an expansion joint profile with serrated sidewalls made of rigid, recycled PVC and a grey, soft PVC expansion zone for use in screed applications.

Schluter-DILEX-MP / -MPV is an expansion joint profile with undercut sidewalls made of rigid, recycled PVC and a soft CPE expansion zone, complete with extension profiles for use in the laying of screeds.

Schluter^®-DILEX-EZ 6 + 9

Schluter-DILEX-EZ 6 and 9 combine decorative design with a stress relieving function for tile and natural stone surfaces installed with thin-set mortar.

Schluter^®-DILEX-BWS

Schluter-DILEX-BWS is a movement joint profile with side sections of rigid, recycled plastic. The movement zone consists of soft CPE and creates the 5-mm-wide visual surface.

Schluter^®-DILEX-BWB

Schluter-DILEX-BWB is a movement joint profile with side sections of rigid, recycled plastic. The top movement zone is made of soft CPE and creates the 10-mm-wide visual surface.

Schluter^®-DILEX-AKWS

Schluter-DILEX-AKWS is a movement profile with side anchoring legs of aluminum connected to a soft PVC movement zone.

Schluter^®-DILEX-EDP

Schluter-DILEX-EDP is a stainless steel movement profile, which allows horizontal movement through a tongue-and-groove connection.

Schluter^®-DILEX-KSN/-EKSB

Schluter-DILEX-KSN is a movement profile with edge protection consisting of lateral anchoring legs made of brass, aluminum, or stainless steel, which are connected to a replaceable movement zone made of soft rubber. Schluter-DILEX-EKSB features stainless steel anchoring legs and a movement zone made of soft synthetic rubber.

Schluter^®-DILEX-KSBT

Schluter-DILEX-KSBT is a movement profile with edge protection, consisting of side anchoring legs of brass, aluminum, or stainless steel connected to a 20-mm or 30-mm-wide movement zone of soft synthetic rubber.

Schluter^®-DILEX-BT/-BT/O/-BTS

Schluter-DILEX-BT is an expansion joint made of aluminum or brass with lateral joint connections to a sliding telescopic centre section. This allows for absorption of three-dimensional movement. Schluter-DILEX-BT/O can be used to create expansion joints at floor/wall transitions. Schluter-DILEX-BTS is added to completed surface coverings.

Schluter^®-DILEX-KSA

Schluter-DILEX-KSA is a perimeter joint profile that isolates the tile covering from fixed building elements (e.g., window and door frames).

Schluter^®-DILEX-AS

Schluter-DILEX-AS is a joining profile for creating flexible joints to fixtures such as shower trays, baths, and door and window frames.

Schluter^®-DILEX-BWA

Schluter-DILEX-BWA provides a flexible connection between tiled surfaces and existing coverings or structures, such as door and window frames.

Schluter^®-DILEX-EKE

Schluter-DILEX-EKE is a corner movement profile that effectively absorbs movement at inside wall corners and at floor/wall transitions in applications where no large movement is expected.

Schluter^®-DILEX-HKW

Schluter-DILEX-HKW is a cove-shaped profile for internal wall corners and wall/floor joints in applications where only slight movement occurs.

Schluter^®-DILEX-HK

Schluter-DILEX-HK is a cove-shaped profile for wall/floor joints, which conforms to the hygienic requirements of commercial bathrooms and the food processing industry.

Schluter^®-DILEX-AHK

Schluter-DILEX-AHK is an anodized aluminum, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions.

Schluter^®-DILEX-AHKA

Schluter^®-DILEX-EHK/-HKS

Schluter-DILEX-EHK and DILEX-HKS are cove-shaped, stainless steel profiles for floor/wall connections in ceramic tile coverings. DILEX-HKS features a flexible synthetic rubber movement zone.