Installation

1. Thoroughly clean the contact area on adjoining fixtures where Schluter-DILEX-AS will be positioned
2. Using a notched trowel, apply thin-set mortar over the area where the trapezoid-perforated anchoring leg will be placed.
3. Remove the paper from the selfadhesive tape. Apply Schluter-KERDI-FIX or silicone sealant parallel and adjacent to self-adhesive tape. Press the profile with self-adhesive tape against the fixture in such a way that the perforated anchoring leg can also be pressed into the applied thin-set mortar.
4. Install inside corners and end caps with Schluter-KERDI-FIX or silicone prior to setting tiles.
5. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage.
6. A joint of approximately 1/16" - 1/8" (1.5 mm - 3 mm) should be left between the tile and the profile.
7. Fill the joint completely with grout or setting material.